ACCESSORIES (Controls & IAQ)

TSTAT0201CW, TSTAT0101SC

Part Number 

Description 

NAXA00101DB

Daughter board for use with non-communicating equipment. Converts 4-wire signal to conventional multiwire signals (Y1, Y2, W1, W2, G, O) NOTE: Can be used in either Single or Multi-Zone Installations

NAXA00101WA

Observer Wireless Access Point for use with TSTAT0201CW model wall control. Provides gateway/router services to an Observer Wi-Fi® network if other Wi-Fi networks are unavailable or unusable. Connects to an existing ethernet network that provides internet access. DOES NOT add Wi-Fi capability to the TSTAT0101SC model wall control.

TSTATXXSEN01B

Outdoor Temperature Sensor, use with non-communicating equipment (communicating outdoor equipment factory equipped with OD temp sensor).

TXMBP01

Backplate, medium size. Covers wall spots left when replacing larger thermostats.

SYSTXGRPLG10

Communicating Plug, 4-wire (DX+, DX-, C, R). Matches connector on control board of communicating indoor and outdoor equipment, 10 pack.

SYSTXIIRRS01

Remote Room Sensor (not required), requires 2-wire stat cable, use 1 or 4 with Observer control for optional remote temperature sensing (temperatures averaged).

ZONING ACCESSORIES

Part Number 

Description 

ZONE0101ZP6

Observer Zone Panel supports up to 6 zones and provides basic relay logic for damper operation and serves as the common connection point for the Observer Zoning System.

ZONE0101RRS

Observer Communicating Room Sensor is a Zone Sensor option for Zones 2 through 6. It provides full setback capabilities (through the Observer wall control interface only) and communicates to Observer Zoning System).

ZONEXX0DTS01

Leavening Air Temperature (LAT) Sensor provides temperature readings to the zoning system to optimize performance and to protect the equipment.

ZDAMPRND06INCB

Round Dampers 6 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPRND08INCB

Round Dampers 8 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPRND10INCB

Round Dampers 10 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPRND12INCB

Round Dampers 12 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPRND14INCB

Round Dampers 14 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPRND16INCB

Round Dampers 16 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC08X10B

Rectangular Dampers 8 inch X 10 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC08X14B

Rectangular Dampers 8 inch X 14 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC08X18B

Rectangular Dampers 8 inch X 18 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC08X24B

Rectangular Dampers 10 inch X 24 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC10X10B

Rectangular Dampers 10 inch X 10 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC10X14B

Rectangular Dampers 10 inch X 14 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC10X18B

Rectangular Dampers 10 inch X 18 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPREC10X24B

Rectangular Dampers 10 inch X 24 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPBAR8X14

Rectangular Barometric Bypass 8 inch X 14 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPBAR8X24

Rectangular Barometric Bypass 8 inch X 24 inch power open, power closed damper with self-aligning shaft and actuator hub.

ZDAMPACT45DEGR

45° Replacement Actuator for Round Dampers.

ZDAMPACT90DEGR

90° Replacement Actuator for Round Dampers.