80% VARIABLE SPEED, TWO-STAGE GAS FURNACE

G80CTL

Features

EASIER TO SELL
  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports two-stage cooling units
  • ION™ Communicating Control System
  • Observer® Communicating Control System
  • Flame roll−out sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier terminal electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
TOUGHER
  • Variable speed ECM blower motor
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ Aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
QUIETER
  • Two−stage operation
  • Two−stage induced draft blower
  • In−shot burners 
  • Insulated blower compartment
EASIER TO INSTALL AND SERVICE
  • 33-1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, with propane gas conversion kits available
  • Four position − upflow/downflow/horizontal (left/right) installation
  • Three position vent elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
LIMITED WARRANTY*
  • 10 year No Hassle Replacement™ limited warranty
  • Lifetime heat exchanger limited warranty
  • 5 year parts limited warranty
  • − With timely registration, an additional 5 year parts limited warranty                       
  • * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
For California Residents:
  • For installation in SCAQMD only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com

 

Unit Performance Data

Model
Number
Heating
Input (BTUH)
Efficiency AFUE Cooling Capacity CFM range @ .5 in. w.c.
(125 Pa)
Operating Dimensions
Height x Width x Depth
inches (millimeters)
Operating Weight
lbs (kg)
G80CTL0451712A 44,000 80% 550-1345 33-1/3 x 17-1/2 x 29
(847 x 445 x 737)
118 (53.5)
G80CTL0701412A 66,000 80% 485-1395 33-1/3 x 14-3/16 x 29
(847 x 360 x 737)
118 (53.5)
G80CTL0701716A 66,000 80% 505-1375 33-1/3 x 17-1/2 x 29
(847 x 445 x 737)
126 (57.1)
G80CTL0702120A 66,000 80% 790-2150 33-1/3 x 21 x 29
(847 x 533 x 737)
147 (66.7)
G80CTL0901716A 88,000 80% 475-1595 33-1/3 x 17-1/2 x 29
(847 x 445 x 737)
134 (60.8)
G80CTL0902120A 88,000 80% 730-2330 33-1/3 x 21 x 29
(847 x 533 x 737)
153 (69.4)
G80CTL1102120A 110,000 80% 700-2155 33-1/3 x 21 x 29
(847 x 533 x 737)
156 (70.7)
G80CTL1352422A 132,000 80% 690-2265 33-1/3 x 24-1/2 x 29
(847 x 622 x 737)
169 (76.6)

Model Number:
G80CTL0451712A

Heating Input (MBTUH):
44000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
550-1345

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 17-1/2 x 29 (847 x 445 x 737)

Operating Weight lbs (kg):
118 (53.5)

Model Number:
G80CTL0701412A

Heating Input (MBTUH):
66000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
485-1395

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 14-3/16 x 29 (847 x 360 x 737)

Operating Weight lbs (kg):
118 (53.5)

Model Number:
G80CTL0701716A

Heating Input (MBTUH):
66000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
505-1375

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 17-1/2 x 29 (847 x 445 x 737)

Operating Weight lbs (kg):
126 (57.1)

Model Number:
G80CTL0702120A

Heating Input (MBTUH):
66000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
790-2150

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 21 x 29 (847 x 533 x 737)

Operating Weight lbs (kg):
147 (66.7)

Model Number:
G80CTL0901716A

Heating Input (MBTUH):
88000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
475-1595

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 17-1/2 x 29 (847 x 445 x 737)

Operating Weight lbs (kg):
134 (60.8)

Model Number:
G80CTL0902120A

Heating Input (MBTUH):
88000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
730-2330

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 21 x 29 (847 x 533 x 737)

Operating Weight lbs (kg):
153 (69.4)

Model Number:
G80CTL1102120A

Heating Input (MBTUH):
110000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
700-2155

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 21 x 29 (847 x 533 x 737)

Operating Weight lbs (kg):
156 (70.7)

Model Number:
G80CTL1352422A

Heating Input (MBTUH):
132000

Efficiency AFUE:
0.8

Cooling Capacity CFM range @ .5 in. w.c. (125 Pa):
690-2265

Operating Dimensions Height x Width x Depth inches (millimeters):
33-1/3 x 24-1/2 x 29 (847 x 622 x 737)

Operating Weight lbs (kg):
169 (76.6)